Ribbon Cable connector Compliant with MIL StandardHIF3B SeriessFeatures
1. Product Compliant with MIL Standard
HIF3B series has been developed as a product compliant with MILstandard, and used for wide applications.
2. UL Approval Product
HIF3B series connectors are UL approved.
3. Mechanism to Prevent Mis-insertion
This connector is equipped with the mechanism to prevent Mis-insertion as follows.
1The system provides the convex area to insert the guide-key on thepin header side, and to guide it in combination with the socketconvex area (MIL standard).
2The system embeds and guides the polarizing key in the socket holes.4. Applicable Cable AWG#28
The applicable cable is UL2651 AWG#28 flat cable (7 cores./0.127mm, jacket dia. 0.9±0.1mm).
sProduct Specifications
RatingItem1. Insulation Resistance2. Withstanding voltage3. Contact Resistance4. Vibration1000Mohms min.Current rating: 1AOperating Temperature Range : –55to +85ç(Note 1)Storage Temperature Range: –10to +60ç(Note 2)Storage Humidity Range: 40to 70% (Note 2)Condition500V DC650V AC/1 minute0.1AVoltage rating: 200V ACOperating Moisture Range: 40to 80%SpecificationNo flashover or insulation breakdown.15mohms max.No electrical discontinuity of 1µs or moreFrequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.96 hours at temperature of 40ç and humidity of 90% to 95%(-65ç: 30 minutes ➝ 15to 35ç: 5 minutes max.125ç: 30 minutes ➝15to 35ç: 5 minutes max.) 5 cycles500 cycles 5.Humidity (Steady state)Insulation resistance: 1000Mohms min.6. Temperature CycleNo damage, cracks, or parts looseness.7. Durability (Mating/un-mating)Contact resistance: 15mohms max.8.Resistance to Soldering heatNo deformation of components affecting performance.Flow: 260ç for 10 seconds Manual soldering: 300ç for 3 secondsNote 1: Includes temperature rise caused by current flow.Note 2: The term \"storage\" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range andHumidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.sMaterial PartInsulatorDSocket ContactDAPin header contactCopper alloyBrassMaterialPBTBeryllium copperConnection areaConnection areaConnection areaConnection areaFinishBlackGold platedGold platedGold platedTin lead plated––––––––––––––RemarksUL94V-0Selective Gold platedB15
元器件交易网www.cecb2b.com
sOrdering Information
qSocket
HIF 3B - *D A - 2.54 R
q
w
e: HIF
: 3B, 3BA, 3BB (50, 60, 64 contacts only)
r
t
y
u
qSeries NamewSeries No.
eNumber of contacts: 16, 20, 26, 30, 34, 40, 50, 60, 64 rContact alignment: D : Doublet
A
: VA type: 2.54mm R: ID type
yContact pitchuConnection type
qPin Header
HIF 3B - *P A - 2.54 DS
q
w
: HIF:
3BC: (10 contacts only) 3BD: (10 contacts only)
e
r
t
y
u
qSeries NamewSeries No.3B
: (14 contacts not included)3BA, 3BB: (50, 60, 64 contacts only)rt
PA
: Pin header
: Selective gold plated: 2.54mm: Right angle type: Straight typeeNumber of contacts: 16, 20, 26, 30, 34, 40, 50, 60, 64
yContact pitchuContact style
DSDSAB16
元器件交易网www.cecb2b.com
sSocket (With guide to prevent mis-insertion)
BodyProtectorClamp
Note1, Note2: The number of polarizing keys and polarizing keyways changes according to products. Refer to the list as shown below.Note3: The 50, 60 and 64 contact connector contain two types of polarizing guides. Use the products, referring to Notes 1 and 2.Note4: The 6 contact has no polarizing mark.
Unit:mm
Part NumberCL No.Part Number–––––––CL No.Number of Contacts61014162026303440505060606464ABCDPolarizing Guide(Note 1)Polarizing Keyway(Note 2)NoneOne on left sideHIF3BA- 6D-2.54R610-0032-312.195.086.357.7217.2710.1611.4312.822.3515.2416.5117.8824.8917.7819.0520.4229.9722.8624.1325.537.5930.4831.7533.1242.6735.5636.8338.247.7540.6441.9143.2855.3748.2649.5350.968.0760.9662.2363.680.7773.6674.9376.385.8578.7480.0181.38One at centerHIF3BA-10D-2.54R610-0021-7HIF3BA-10DA-2.54R610-0651-55HIF3BA-14D-2.54R610-0022-0HIF3BA-14DA-2.54R610-0652-85HIF3BA-16D-2.54R610-0023-2HIF3BA-16DA-2.54R610-0653-05HIF3BA-20D-2.54R610-0024-5HIF3BA-20DA-2.54R610-0654-35HIF3BA-26D-2.54R610-0025-8HIF3BA-26DA-2.54R610-0655-65HIF3BA-30D-2.54R610-0026-0HIF3BA-30DA-2.54R610-0656-95HIF3BA-34D-2.54R610-0027-3HIF3BA-34DA-2.54R610-0657-15HIF3BA-40D-2.54R610-0028-6HIF3BA-40DA-2.54R610-0658-45HIF3BA-50D-2.54R610-0029-9HIF3BA-50DA-2.54R610-0659-75HIF3BB-50D-2.54R610-0041-4HIF3BB-50DA-2.54R610-0671-25HIF3BA-60D-2.54R610-0030-8HIF3BA-60DA-2.54R610-0660-65HIF3BB-60D-2.54R610-0042-7HIF3BB-60DA-2.54R610-0672-55HIF3BA-64D-2.54R610-0031-0HIF3BA-64DA-2.54R610-0661-95HIF3BB-64D-2.54R610-0043-0HIF3BB-64DA-2.54R610-0673-8One on right and68.0760.9662.2363.6One on right and left sides, resp.left sides, resp.One at centerOne at centerOne at center80.7773.6674.9376.3One on right and left sides, resp.85.8578.7480.0181.38One on right and left sides, resp.The products marked with 5comply with MIL standard.B17
元器件交易网www.cecb2b.com
sSocket with Withdrawal Tab
Unit : mm
Part NumberHIF3BA-10D-2.54R-CLHIF3BA-16D-2.54R-CL HIF3BA-20D-2.54R-CL HIF3BA-26D-2.54R-CLHIF3BA-30D-2.54R-CLHIF3BA-34D-2.54R-CLHIF3BA-40D-2.54R-CLHIF3BA-50D-2.54R-CLHIF3BB-50D-2.54R-CLHIF3BA-60D-2.54R-CLHIF3BB-60D-2.54R-CLHIF3BA-64D-2.54R-CLHIF3BB-64D-2.54R-CLCL No.610-0190-4610-0192-0610-0193-2610-0194-5610-0195-8610-0196-0610-0197-3610-0198-6610-0201-9610-0199-9610-0202-1610-0200-6610-0203-4Number of Contacts10162026303440506064A17.2724.8929.9737.5942.6747.7555.3768.0780.7785.85B5.312.918.025.530.535.843.456.068.573.8B18
元器件交易网www.cecb2b.com
sSocket
BodyProtectorClamp
Note1: The number of polarizing keys and polarizing keyways changes according to products. For details, refer to the list as shown below.Note2: The 6 contact has no polarizing mark.
Unit:mm
Part NumberCL No.Number of Contacts61014162026303440506064ABCDPolarizing Guide(Note 1)NoneOne on left sideHIF3B- 6D-2.54R610-0012-65HIF3B-10D-2.54R610-0001-05HIF3B-14D-2.54R610-0002-25HIF3B-16D-2.54R610-0003-55HIF3B-20D-2.54R610-0004-85HIF3B-26D-2.54R610-0005-05HIF3B-30D-2.54R610-0006-35HIF3B-34D-2.54R610-0007-65HIF3B-40D-2.54R610-0008-95HIF3B-50D-2.54R610-0009-15HIF3B-60D-2.54R610-0010-05HIF3B-64D-2.54R610-0011-312.195.086.357.7217.2710.1611.4312.8022.3515.2416.5117.8824.8917.7819.0520.4229.9722.8624.1325.5037.5930.4831.7533.1242.6735.5636.8338.247.7540.6441.9143.2855.3748.2649.5350.9068.0760.9662.2363.680.7773.6674.9376.385.8578.7480.0181.38One on right andleft sides, resp.The products marked with 5comply with MIL standard.B19
元器件交易网www.cecb2b.com
sFour Wall Angle Through hole
BPCB mounting pattern
sn=number of contacts
Note 1, Note 2: The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown below.
Note 3: The spacer moves to the right according to the number of
contacts.
Note 4: The 10, 50, 60 and 64 contact connectors contain two types of
polarizing slots.
Use products, referring to (Note 1) (Note 2).
Unit:mm
Part NumberCL No.Number of Contacts101014162026303440505060606464ABCD28.14MAX51.128.14MAX51.133.24MAX56.235.74MAX58.740.84MAX63.848.44MAX71.453.54MAX76.558.64MAX81.666.24MAX89.278.94MAX101.978.94MAX101.991.64MAX114.691.64MAX114.696.74MAX119.796.74MAX119.7EFPolarizing Slot(Note 1)NonePolarizing Key Install(Note 2)One on right sideNoneOne on right side5HIF3BA-10PA-2.54DS610-0091-2HIF3BD-10PA-2.54DS610-0171-05HIF3BA-14PA-2.54DS610-0092-55HIF3BA-16PA-2.54DS610-0093-85HIF3BA-20PA-2.54DS610-0094-05HIF3BA-26PA-2.54DS610-0095-35HIF3BA-30PA-2.54DS610-0096-65HIF3BA-34PA-2.54DS610-0097-95HIF3BA-40PA-2.54DS610-0098-15HIF3BA-50PA-2.54DS610-0099-45HIF3BB-50PA-2.54DS610-0131-55HIF3BA-60PA-2.54DS610-0100-15HIF3BB-60PA-2.54DS610-0132-85HIF3BA-64PA-2.54DS610-0101-45HIF3BB-64PA-2.54DS610-0133-032.017.510.1632.017.510.1637.122.615.2439.625.117.7844.730.222.8652.337.830.4857.442.935.5662.548.040.6470.155.648.2682.868.360.9682.868.360.9695.581.073.6695.581.073.66100.686.178.74100.686.178.7421.827.921.827.926.933.029.535.534.540.642.248.347.253.352.358.459.966.0One at center72.678.7One on right and left sides, resp.72.678.785.391.490.496.5One at centerOne at centerOne at center85.391.4One on right and left sides, resp.90.496.5One on right and left sides, resp.One on right andleft sides, resp.The products marked with 5comply with MIL standard.B20
元器件交易网www.cecb2b.com
sFour-Wall Straight Through hole
BPCB mounting pattern
sn=number of contacts
Note 1, Note 2: The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown below.
Note 3: The spacer moves to the right according to the number of
contacts.
Note 4: The 10, 50, 60 and 64 contact connectors contain two types of
polarizing slots.
Use products, confirming (Note 1) (Note 2).
Note 5: The 6 contact has no polarity mark.
Unit:mm
Part Number5HIF3-6PA-2.54DSAHIF3BA-10PA-2.54DSA5HIF3BD-10PA-2.54DSA5HIF3BA-14PA-2.54DSA5HIF3BA-16PA-2.54DSA5HIF3BA-20PA-2.54DSA5HIF3BA-26PA-2.54DSA5HIF3BA-30PA-2.54DSA5HIF3BA-34PA-2.54DSA5HIF3BA-40PA-2.54DSA5HIF3BA-50PA-2.54DSA5HIF3BB-50PA-2.54DSA5HIF3BA-60PA-2.54DSA5HIF3BB-60PA-2.54DSA5HIF3BA-64PA-2.54DSA5HIF3BB-64PA-2.54DSACL No.562-0503-9610-0111-8610-0181-3610-0112-0610-0113-3610-0114-6610-0115-9610-0116-1610-0117-4610-0118-7610-0119-0610-0141-9610-0120-9610-0142-1610-0121-1610-0143-4Number of Contacts6101014162026303440505060606464ABCD23.06MAX46.0228.14MAX51.128.14MAX51.133.24MAX56.235.74MAX58.740.84MAX63.848.44MAX71.453.54MAX76.558.64MAX81.666.24MAX89.278.94MAX101.978.94MAX101.991.64MAX114.691.64MAX114.696.74MAX119.796.74MAX119.7EFPolarizing Slot(Note 1)One at centerNonePolarizing Key Install(Note 2)NoneOne on right sideNoneOne on right side26.9212.4205.0832.017.510.1632.017.510.1637.122.615.2439.625.117.7844.730.222.8652.337.830.4857.442.935.5662.548.040.6470.155.648.2682.868.360.9682.868.360.9695.581.073.6695.581.073.66100.686.178.74100.686.178.7416.722.8221.827.921.827.926.933.029.535.534.540.642.248.347.253.352.358.459.966.0One at center72.678.7One on right and left sides, resp.72.678.785.391.490.496.5One at centerOne at centerOne at center85.391.4One on right and left sides, resp.90.496.5One on right and left sides, resp.One on right andleft sides, resp.The products marked with 5comply with MIL standard.B21
元器件交易网www.cecb2b.com
sThree Wall Angle Type
BPCB mounting pattern
sn=number of contacts
Note 1, Note 2: The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown below.
Note 3: The spacer moves according to the number of contacts.Note 4: The 10 contact connector consists of two types.
Use products, confirming (Note 1) (Note 2).
Note 5: The 6 contact has no polarity mark.
Note 6: The nut built-in specification product is also provided.
The product can be fixed by M2 screws from the rear side.Use the screw of (board thickness) +4 mm under the neck.
Unit:mm
Part NumberCL No.Number of Contacts1010162026303440506064ABCD28.14MAX51.128.14MAX51.135.74MAX58.740.84MAX63.848.44MAX71.453.54MAX76.558.64MAX81.666.24MAX89.278.94MAX101.991.64MAX114.696.74MAX119.7EFPolarizing Slot(Note 1)NonePolarizing Key Install(Note 2)One on right sideNone5HIF3BD-10PA-2.54DS610-0051-8HIF3BC-10PA-2.54DS610-0151-25HIF3BD-16PA-2.54DS610-0052-05HIF3BD-20PA-2.54DS610-0053-35HIF3BD-26PA-2.54DS610-0054-65HIF3BD-30PA-2.54DS610-0055-95HIF3BD-34PA-2.54DS610-0056-15HIF3BD-40PA-2.54DS610-0057-45HIF3BD-50PA-2.54DS610-0058-75HIF3BD-60PA-2.54DS610-0059-05HIF3BD-64PA-2.54DS610-0060-932.017.510.1632.017.510.1639.625.117.7844.730.222.8652.337.830.4857.442.935.5662.548.040.6470.155.648.2682.868.360.9695.581.073.66100.686.178.7421.827.921.827.929.535.534.540.642.248.347.253.352.358.459.966.072.678.7One at centerOne on right andleft sides, resp.85.391.4One on right and left sides, resp.90.496.5The products marked with 5comply with MIL standard.B22
元器件交易网www.cecb2b.com
sThree Wall Straight Through hole
BPCB mounting pattern
sn=number of contacts
Note1,Note2: The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shownbelow.
Note3: The spacer moves to the right according to the number of
contacts.
Note4: The 10 contact connector consists of two types.
Use products, referring to (Note 1) and (Note 2).
Note5: The 6 contact has no polarity mark.
Unit:mm
Part NumberCL No.Number of Contacts1010162026303440506064ABCD28.14MAX51.128.14MAX51.135.74MAX58.740.84MAX63.848.44MAX71.453.54MAX76.558.64MAX81.666.24MAX89.278.94MAX101.991.64MAX114.696.74MAX119.7EFPolarizing Slot(Note 1)NonePolarizing Key Install(Note 2)One on right sideNone5HIF3BD-10PA-2.54DSA610-0071-5HIF3BC-10PA-2.54DSA610-0161-65HIF3BD-16PA-2.54DSA610-0072-85HIF3BD-20PA-2.54DSA610-0073-05HIF3BD-26PA-2.54DSA610-0074-35HIF3BD-30PA-2.54DSA610-0075-65HIF3BD-34PA-2.54DSA610-0076-95HIF3BD-40PA-2.54DSA610-0077-15HIF3BD-50PA-2.54DSA610-0078-45HIF3BD-60PA-2.54DSA610-0079-75HIF3BD-64PA-2.54DSA610-0080-632.017.510.1632.017.510.1639.625.117.7844.730.222.8652.337.830.4857.442.935.5662.548.040.6470.155.648.2682.868.360.9695.581.073.66100.686.178.7421.827.921.827.929.535.534.540.642.248.347.253.352.358.459.966.072.678.7One at centerOne on right andleft sides, resp.85.391.4One on right and left sides, resp.90.496.5The products marked with 5comply with MIL standard.B23
元器件交易网www.cecb2b.com
sFour Wall Wrapping Type
BPCB mounting pattern
sn=number of contacts
Note 1, Note 2. The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown below.
Note 3. The spacer moves to the right according to the number of
contacts.
Note 4. The 10, 50, 60 and 64 contact connectors consists of two types.
Use products, confirming (Note 1) (Note 2).
Note 5. The mark *indicates the number of contacts.
Note 6. The nut built-in specification product is also provided.
The product can be fixed by M2 screws from the rear side.Use the screw of (board thickness) +4 mm under the neck.
Unit:mm
Part NumberCL No.Number of Contacts101014162026303440505060606464ABCD28.14MAX51.128.14MAX51.133.24MAX56.235.74MAX58.740.84MAX63.848.44MAX71.453.54MAX76.558.64MAX81.666.24MAX89.278.94MAX101.978.94MAX101.991.64MAX114.691.64MAX114.696.74MAX119.796.74MAX119.7EFPolarizing Slot(Note 1)NonePolarizing Key Install(Note 2)One on right sideNoneOne on right side5HIF3BA-10P-2.54W610-0503-8HIF3BD-10P-2.54W610-0492-35HIF3BA-14P-2.54W610-0493-65HIF3BA-16P-2.54W610-0494-95HIF3BA-20P-2.54W610-0495-15HIF3BA-26P-2.54W610-0496-45HIF3BA-30P-2.54W610-0497-75HIF3BA-34P-2.54W610-0498-05HIF3BA-40P-2.54W610-0499-25HIF3BA-50P-2.54W610-0504-05HIF3BB-50P-2.54W610-0500-05HIF3BA-60P-2.54W610-0505-35HIF3BB-60P-2.54W610-0501-25HIF3BA-64P-2.54W610-0506-65HIF3BB-64P-2.54W610-0502-532.017.510.1632.017.510.1637.122.615.2439.625.117.7844.730.222.8652.337.830.4857.442.935.5662.548.040.6470.155.648.2682.868.360.9682.868.360.9695.581.073.6695.581.073.66100.686.178.74100.686.178.7421.827.921.827.926.933.029.535.534.540.642.248.347.253.352.358.459.966.0One at center72.678.7One on right and left sides, resp.72.678.785.391.490.496.5One at centerOne at centerOne at center85.391.4One on right and left sides, resp.90.496.5One on right and left sides, resp.One on right andleft sides, resp.The products marked with 5comply with MIL standard.B24
元器件交易网www.cecb2b.com
sFour Wall Straight Through hole[Flux Blister Prevention Type]
BPCB mounting pattern
Note1: The number of polarizing slot and key installed positions changes
according to products. Refer to the list as shown below.
sn=number of contacts
Unit:mm
Part NumberCL No.Number of Contacts101016202630344050506064ABCD28.14MAX51.128.14MAX51.135.74MAX58.740.84MAX63.848.44MAX71.453.54MAX76.558.64MAX81.666.24MAX89.278.94MAX101.978.94MAX101.991.64MAX114.696.74MAX119.7EFPolarizing SlotNonePolarizing Key InstallOne on right sideNone5HIF3CA-10PA-2.54DSA610-0701-1HIF3CD-10PA-2.54DSA610-0722-15HIF3CA-16PA-2.54DSA610-0703-75HIF3CA-20PA-2.54DSA610-0704-05HIF3CA-26PA-2.54DSA610-0705-25HIF3CA-30PA-2.54DSA610-0706-55HIF3CA-34PA-2.54DSA610-0707-85HIF3CA-40PA-2.54DSA610-0708-05HIF3CA-50PA-2.54DSA610-0709-35HIF3CB-50PA-2.54DSA610-0721-95HIF3CB-60PA-2.54DSA610-0723-45HIF3CB-64PA-2.54DSA610-0724-732.017.510.1632.017.510.1639.625.117.7844.730.222.8652.337.830.4857.442.935.5662.548.040.6470.155.648.2682.868.360.9682.868.360.9695.581.073.66100.686.178.7421.827.921.827.929.535.534.540.642.248.347.253.352.358.459.966.0One at centerOne on right andleft sides, resp.72.678.7One on right and left sides, resp.72.678.785.391.490.496.5The products marked with 5comply with MIL standard.One at centerB25
元器件交易网www.cecb2b.com
sTwo Stage Staking Right Angle Through hole
Note 1, Note 2: The number of polarizing slot and key installed positions changes according to products. Refer
to the list as shown below.
Note 3: The spacer moves to the right according to the number of contacts.Note 4: The 10, 50, 60 and 64 contact connectors consists of two types.
Use products, confirming (Note 1) (Note 2).
Note 5: The mark *ndicates the number of contacts.Note 6: The locator is located optionally.
Unit:mm
Part Number5HIF3BA-10PA-2.54WB5HIF3BA-16PA-2.54WB5HIF3BA-20PA-2.54WB5HIF3BA-26PA-2.54WB5HIF3BA-30PA-2.54WB5HIF3BA-34PA-2.54WB5HIF3BA-40PA-2.54WB5HIF3BA-50PA-2.54WB5HIF3BB-50PA-2.54WB5HIF3BA-60PA-2.54WB5HIF3BB-60PA-2.54WB5HIF3BA-64PA-2.54WB5HIF3BB-64PA-2.54WBCL No.610-1502-0610-1505-9610-1506-1610-1507-4610-1508-7610-1509-0610-1510-9610-1511-1610-1512-4610-1513-7610-1514-0610-1515-2610-1516-5Number of Contacts1010162026303440505060606464ABCD28.14MAX51.128.14MAX51.135.74MAX58.740.84MAX63.848.44MAX71.453.54MAX76.558.64MAX81.666.24MAX89.278.94MAX101.978.94MAX101.991.64MAX114.691.64MAX114.696.74MAX119.796.74MAX119.7EFPolarizing Slot(Note 1)NonePolarizing Key Install(Note 2)One on right sideNone32.017.510.1632.017.510.1639.625.117.7844.730.222.8652.337.830.4857.442.935.5662.548.040.6470.155.648.2682.868.360.9682.868.360.9695.581.073.6695.581.073.66100.686.178.74100.686.178.7421.827.921.827.929.535.534.540.642.248.347.253.352.358.459.966.0HIF3BD-10PA-2.54WB610-1503-3One at center72.678.7One on right and left sides, resp.72.678.785.391.490.496.5One at centerOne at centerOne at center85.391.4One on right and left sides, resp.90.496.5One on right and left sides, resp.One on right andleft sides, resp.The products marked with 5comply with MIL standard.B26
元器件交易网www.cecb2b.com
BCombination Pattern
Note : Fix the HIF3-mounting hole spacer by screws between upper stage and lower stage connectors.
BPCB mounting pattern
sMounting Hole Spacer
Part NumberHIF-3 mounting hole spacerCL No.562-0714-4FinishPBT BlackNote : 2 pieces are contained in a bag.
B27
元器件交易网www.cecb2b.com
BPolarizing Key
HIF3B-GKCL562-0601-8
HIF3-GPIN(A)HIF3BA-GPIN
Note1: One unit of this
product is a set of fivepieces in conjunctionwith a runner. The unitfor sale is defined onepack containing 20pieces.
Note2: This product is
applicable to HIF3A-*D2.54R, HIF3C-*D2.54C andHIF3BA-*D2.54Cproducts.
Note1: One unit of this
product is a set of fivepieces in conjunctionwith a runner. The unitfor sale is defined onepack containing 20pieces.
Note2: This product is
applicable to theHIF3BA-*D2.54Rproduct.
Part NumberCL No.MaterialPoly acetal (white)RemarksA set of 5 piecesPart NumberCL No.MaterialPoly acetal (white)RemarksA set of 5 piecesHIF3-GPIN(A)562-0126-6HIF3BA-GPIN612-0500-2B28
元器件交易网www.cecb2b.com
BHIF3-Multi ClampBHIF3-*CL Pull Tab
This clamp is used for intermediate connection in thebus-line system, etc. Remove compulsory force from theinsulation displacement area of the connector inintermediate connection.
Note: The pin header corresponds to the HIF3BAE
series (lock E).
This pull tab is used for the HIF3 series equipped with cable clampfunction. Remove all compulsory force, which is loaded on theinsulation displacement area of the connector for extraction.Note: This HIF3-* Pull Tab can not be used for HIF3BA-*PD.Note: The pin header corresponds to the HIF3BAE series (lock E).
BLock
qLow Profile Lock Pin Header
Lock GPart Number : HIF3BAG-**PA-2.54DSAqF Type Lock Pin Header
Lock FPart Number : HIF3BAG-**PA-2.54DSAqLow profile type, and used for lock ejection.Connector height is reduced.Since no connector clamp is needed on the cable side,this is used without turning back on the cable side. Takecare about this point.21.5qLocking range more reduced than conventional lock type.Even if connectors are aligned laterally, the mountingspace is reduced.Note : The clamp must be replaced for HIF3A socket type50 contacts only. Take care about this point.27.3B29
元器件交易网www.cecb2b.com
sSocket for Crimping
Unit: mmPart NumberHIF3BA-10D-2.54CHIF3BA-14D-2.54CHIF3BA-16D-2.54CHIF3BA-20D-2.54CHIF3BA-26D-2.54CHIF3BA-30D-2.54CHIF3BA-34D-2.54CHIF3BA-40D-2.54CHIF3BA-50D-2.54CHIF3BB-50D-2.54CHIF3BA-60D-2.54CHIF3BB-60D-2.54CHIF3BA-64D-2.54CHIF3BB-64D-2.54CCL No.610-1041-0610-1051-3610-1042-2610-1043-5610-1044-8610-1045-0610-1046-3610-1047-6610-1048-9610-1061-7610-1049-1610-1062-0610-1064-5610-1063-2Number of Contacts1014162026303440506064A17.2522.3524.829.9537.5542.6347.7555.3568.0480.7785.85B10.1615.2417.7822.8630.4835.5640.6448.2660.9673.6678.74One right and left side, resp.One at centerOne right and left side, resp.One at centerOne right and left side, resp.One at centerOne at centerPolarizing GuideB30
元器件交易网www.cecb2b.com
sCover Case for Crimping socket
Unit: mmPart NumberHIF3-20CVHIF3-26CVHIF3-30CVHIF3-34CVHIF3-40CVHIF3-50CVHIF3-60CVCL No.562-0201-0562-0202-2562-0203-5562-0204-8562-0205-0562-0206-3562-0207-6Number of Contacts20263034405060A24.530.232.234.236.239.242.2B18.020.022.024.026.029.032.0C12.014.016.018.020.023.026.0D30.532.033.033.535.538.040.5E29.9537.5542.6347.7555.3568.0480.77Note: The type F lock pin header cannot be used for a mating member.B31
元器件交易网www.cecb2b.com
sContact for Crimping Socket
HIF3-2226SCHIF3-2226SCAApplicable cableManual crimping tool562-0079-8gold plated contact in bag562-0244-2Selective gold plated contact in bagAWG#22 to #26 UL 1007 Stranded wireHIF3-T2226HCHIF3-2428SCHIF3-2428SCAApplicable cableManual crimping tool562-0124-0gold plated contact in bag562-0246-8Selective gold plated contact in bagAWG#24 to #28 UL 1007 Stranded wireHIF3-TA2428HCHIF3-2022SC562-0492-4gold plated contact in bagApplicable cableAWG#20 to #22 UL 1007 Stranded wireManual crimping toolHIF3-TA2022HCHIF3-2226SCF562-0080-7gold plated contact in reel*HIF3-2226SCFA562-0245-5Selective gold plated contact in reelApplicable cableAWG#22 to #26 UL 1007 Stranded wireNote:* products have both side careers.HIF3-2428SCF562-0125-3gold plated contact in reel*HIF3-2428SCFA562-0247-0Selective gold plated contact in reelApplicable cableAWG#24 to #28 UL 1007 Stranded wireHIF3-2022SCF562-0493-7gold plated contact in reelApplicable cableAWG#20 to #22 UL 1007 Stranded wireType VA (Selective gold plated in reel)Applicable CablePart NumberCL No.AHIF3-2226SCFC613-0002-1AWG#22 to #26 UL 1007 Stranded wire11.5HIF3-2630SCFC613-0001-9AWG#26 to #30 UL 1007 Stranded wire11.5HIF3A-3236SCFC613-0005-0AWG#32 to #36 UL 1007 Stranded wire12.4B0.80.81.7C1.81.41.1D1.81.351.1E2.32.01.4F2.62.11.5Type VA (Selective gold plated contact in bag)Applicable CableManual Crimp ToolABCDEFPart NumberCL No.HIF3-2226SCC613-0004-7AWG#22 to #26 UL 1007 Stranded wireHIF3-TB2226HC11.50.81.81.82.32.6HIF3-2630SCC613-0003-4AWG#26 to #30 UL 1007 Stranded wireHIF3-TB2630HC11.50.81.41.352.02.1B32
元器件交易网www.cecb2b.com
BTools
qCrimping Tool
Part NumberHIF3-T2226HCCL No.550-0063-8Manual Crimping Tool HIF3-T2226HC
qAutomatic Crimping Tool (Type: CM-105)
Part NumberCM-105CL No.901-0005-4qContact Extraction ToolsHow to use the extraction tool
(1) How to extract contacts
As shown in Figure 1, where theextraction tool is inserted in the lancefixed slot on the insulated case, slightlypull the cable, and the contact can beremoved.
(2) How to adjust the lance (raise)In order to re-insert the contactremoved from the insulated case,raise the contact lance area using thetool A, and re-insert the contact, asshown in Figure 2.
Part NumberHIF1-POCL No.550-0049-7Figure 1
B33
元器件交易网www.cecb2b.com
TypeManualItemManual crimping toolPart NumberHIF3-T2226HCHIF3-TA2428HCHIF3-TA2022HCHIF3-TB2226HCHIF3-TB2630HCAutomaticAutomatic crimping tool unitCM-105ApplicatorAP105-HIF3-22-28SCF(Note1)CL No.550-0063-8550-0100-2550-0124-0550-0154-1550-0155-4901-0005-4901-4031-6901-4030-3901-4027-9901-4005-6901-4006-9901-4007-1550-0049-7Applicable ContactHIF3-2226SCHIF3-2226SCAHIF3-2428SCHIF3-2428SCAHIF3-2022SCHIF3-2226SCCHIF3-2630SCC–––––––HIF3-2226SCFHIF3-2428SCFHIF3-2226SCFAHIF3-2428SCFAHIF3-2022SCFHIF3-2226SCFCHIF3-2630SCFCHIF3-3236SCFC–––––––Applicable CableAWG#22 to #26AWG#24 to #28AWG#20 to #22AWG#22 to #26AWG#26 to #30–––––––AWG#22 to #26AWG#24 to #28AWG#22 to #26AWG#24 to #28AWG#20 to #22AWG#22 to #26AWG#26 to #30AWG#32 to #36–––––––AP105-HIF3-22-28SCFAAP105-HIF3-2022SAP105-HIF3-2226SCFCAP105-HIF3-2630SCFCAP105-HIF3-3236SCFCExtraction toolHIF1-PO(Note1)Note1: AP106-HIF3-22-28SCF and AP105-HIF3-22-28CFA can be modified by changing a few parts.
B34
元器件交易网www.cecb2b.com
BSocket Side (Crimping) Assembling Procedures
(1) As shown in Figure 1, peel the applicable cable (AWG#20 to #26) jacket, and connect it using crimping jig HIF3-TA2022HC,HIF3-TA2226HC, or HIF3-TA2426HC. In this case, insert the cable so as to hit the contact cable stripper position as shownFigure 2.
(2) After connection as shown Figure 2, check the contact direction, and insert the contact as shown Figures 3 and 4. Slightly pullthe cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (A).
Note : For handling procedures for special crimping tools, refer to the \"Handling Instruction Manual\".
Figure 1Figure 2
Figure 3Figure 4
B35
元器件交易网www.cecb2b.com
HIF3B Connection Circuit Diagram
Type AB
Type AD
Type CD
B36
TypeCDTypeADTypeAB元器件交易网www.cecb2b.com
Type AC
Type CC
Type AA
TypeAATypeCCTypeACB37
元器件交易网www.cecb2b.com
HIF2E R(S) A to HIF3B Connection Circuit Diagram
Type AA
Type AC
B38
元器件交易网www.cecb2b.com
Type BA
Type BC
B39
元器件交易网www.cecb2b.com
HIF2E R(S)B to HIF3 Connection Circuit Diagram
Type AA
Type AC
B40
元器件交易网www.cecb2b.com
Type BA
Type BC
B41
因篇幅问题不能全部显示，请点此查看更多更全内容