搜索
您的当前位置:首页正文

HD74HC597P资料

来源:知库网
HD74HC597

8-bit Latch/Shift Register

ADE-205-515 (Z)

1st. EditionSep. 2000

Description

The HD74HC597 consists of an 8-bit storage latch feeding a parallel-in, serial-out 8-bit shift register. Boththe storage register and shift register have positive-edge triggered clocks. The shift register also has directload (from storage) and clear inputs.

Features

• • • • •

High Speed Operation: tpd (SCK to QH’) = 14 ns typ (CL = 50 pF)High Output Current: Fanout of 10 LSTTL LoadsWide Operating Voltage: VCC = 2 to 6 VLow Input Current: 1 µA max

Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C)

Function Table

RCK

SCKXXXXXXXXX

SLoadXLLLHHSCLRXHHLLHFunction

Data loaded to input latchesData loaded from inputs to shift registerData transferred from input latches to shift register

Invalid logic, state of shift register indeterminate when signalsremoved

Shift register cleared

Shift register clocked Qn = Qn – 1, QA = SERHD74HC597

Pin Arrangement

B1C2D3E4F5G6H7GND8(Top view)16VCC15A14SER13S Load12RCK11SCK10SCLR9Q'H2

HD74HC597

Logic Diagram

SCLRSLoadRCKSERSCKADQCSCDQRBDQCSCDQRCDEFGHDQCSCDQRQ'H3

HD74HC597

DC Characteristics

Ta = 25°C

ItemInput voltage

SymbolVIH

2.04.56.0

VIL

2.04.56.0

Output voltage

VOH

2.04.56.04.56.0

VOL

2.04.56.04.56.0

Input currentQuiescent supplycurrent

IinICC

6.06.0

1.5—3.15—4.2————

———

———0.51.8

Ta = –40 to+85°C

Max———0.51.351.8—————0.10.10.10.330.33±1.040

µAµA

IOL = 4 mAIOL = 5.2 mA

Vin = VCC or GND

Vin = VCC or GND, Iout = 0 µA

V

IOH = –4 mAIOH = –5.2 mA

Vin = VIH or VILIOL = 20 µA

V

Vin = VIH or VILIOH = –20 µA

VUnitV

Test Conditions

1.53.154.2——1.94.45.94.135.63———

VCC (V)MinTypMaxMin

1.35—

1.92.0—4.44.5—5.96.0—4.18—5.68————————

——

0.00.10.00.10.00.1————

0.26—0.26—±0.1—4.0

4

HD74HC597

AC Characteristics (CL = 50 pF, Input tr = tf = 6 ns)

Ta = 25°C

Item

Maximum clockfrequency

Propagation delaytPLHtime

tPHLSymbolfmax

2.04.56.02.04.56.02.04.56.0

Removal time

trem

2.04.56.0

Setup time

tsu

2.04.56.02.04.56.02.04.56.0

Hold time

th

2.04.56.02.04.56.0

Pulse width

tw

2.04.56.0

—————————2017201720172017555555801614

————14——17—————1—0————————7—

5273135304236—–———————————————————

Ta = –40 to+85°C

Max4212422044372655345—————————————————————

nsns

LCK to Data

ns

SCK to SA

ns

Data to RCK

ns

SER to SCK

ns

RCK to SCK

nsns

RCK to QH’

ns

SCK or SLoad or SCLR to QH’

UnitMHz

Test Conditions

———————12525211252521125252112525215555551002017

VCC (V)MinTypMaxMin

175—

210—

100—

100—

100—

100—

5

HD74HC597

AC Characteristics (CL = 50 pF, Input tr = tf = 6 ns) (cont)

Ta = 25°C

Item

Output rise/falltime

Input capacitance

SymboltTLHtTHLCin

2.04.56.0—

————

—4—5

75151310

Ta = –40 to+85°C

Max95191610

pFUnitns

Test Conditions

————

VCC (V)MinTypMaxMin

6

HD74HC597

Package Dimensions

Unit: mm19.20 20.00 Max 16911.31.11 Max 8 7.40 Max6.30 0.51 Min2.54 Min5.06 Max7.622.54 ± 0.250.48 ± 0.100.25– 0.050° – 15°Hitachi CodeJEDECEIAJMass (reference value)+ 0.13DP-16ConformsConforms1.07 gUnit: mm10.0610.5 Max 16910.80 Max*0.22 ± 0.050.20 ± 0.0485.57.80+ 0.20– 0.301.150° – 8°0.70 ± 0.201.27*0.42 ± 0.080.40 ± 0.060.12 MHitachi CodeJEDECEIAJMass (reference value)FP-16DA—Conforms0.24 g*Dimension including the plating thicknessBase material dimension0.10 ± 0.100.152.20 Max7

HD74HC597

Unit: mm9.910.3 Max1693.9511.270.635 Max80.14– 0.041.75 Max*0.22 ± 0.030.20 ± 0.03+ 0.116.10– 0.301.08+ 0.100° – 8°*0.42 ± 0.080.40 ± 0.060.150.25M0.60+ 0.67– 0.20*Dimension including the plating thicknessBase material dimensionHitachi CodeJEDECEIAJMass (reference value)FP-16DNConformsConforms0.15 g8

HD74HC597

Cautions

1.Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,

copyright, trademark, or other intellectual property rights for information contained in this document.Hitachi bears no responsibility for problems that may arise with third party’s rights, includingintellectual property rights, in connection with use of the information contained in this document.2.Products and product specifications may be subject to change without notice. Confirm that you havereceived the latest product standards or specifications before final design, purchase or use.

3.Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,contact Hitachi’s sales office before using the product in an application that demands especially highquality and reliability or where its failure or malfunction may directly threaten human life or cause riskof bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,traffic, safety equipment or medical equipment for life support.

4.Design your application so that the product is used within the ranges guaranteed by Hitachi particularlyfor maximum rating, operating supply voltage range, heat radiation characteristics, installation

conditions and other characteristics. Hitachi bears no responsibility for failure or damage when usedbeyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeablefailure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or otherconsequential damage due to operation of the Hitachi product.5.This product is not designed to be radiation resistant.

6.No one is permitted to reproduce or duplicate, in any form, the whole or part of this document withoutwritten approval from Hitachi.

7.Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductorproducts.

Hitachi, Ltd.Semiconductor & Integrated Circuits.Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, JapanTel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109URLNorthAmerica EuropeAsia Japan: http://semiconductor.hitachi.com/: http://www.hitachi-eu.com/hel/ecg: http://sicapac.hitachi-asia.com: http://www.hitachi.co.jp/Sicd/indx.htmHitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00, Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877URL : http://www.hitachi.com.sgHitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL : http://www.hitachi.com.hk For further information write to:Hitachi Semiconductor (America) Inc.179 East Tasman Drive,San Jose,CA 95134 Tel: <1> (408) 433-1990Fax: <1>(408) 433-0223Hitachi Europe GmbHElectronic Components GroupDornacher Straβe 3D-85622 Feldkirchen, MunichGermanyTel: <49> (89) 9 9180-0Fax: <49> (89) 9 29 30 00Hitachi Europe Ltd.Electronic Components Group.Whitebrook ParkLower Cookham RoadMaidenheadBerkshire SL6 8YA, United KingdomTel: <44> (1628) 585000Fax: <44> (1628) 585160Copyright © Hitachi, Ltd., 2000. All rights reserved. Printed in Japan.Colophon 2.09

因篇幅问题不能全部显示,请点此查看更多更全内容

Top