标准拉钉

TAP/D TAP/K 󰀁

BS BS

Rivet body material : Aluminum alloy (A5154) Mandrel material : Steel (Hard steel wire) 󰀁

Standard aluminum alloy rivets. Many sizes are available to accommodate nominal rivet diameters of 2.0 mm to 6.4 mm and a

󰀁

maximum clinching thickness of 25.6 mm. Nominal rivet diameter D (mm)

Hole diameter (mm)

Recommended

Rivet No.

Grip Range (mm) (D) 1.0-1.61.6-3.23.2-4.84.8-6.46.4-8.01.0-3.23.2-4.84.8-6.46.4-8.08.0-9.61.0-3.23.2-4.84.8-6.41.0-1.61.6-3.23.2-4.84.8-6.46.4-8.08.0-9.6

(K) - - - - - 1.6-3.23.2-4.84.8-6.46.4-8.08.0-9.61.6-3.23.2-4.84.8-6.4- 1.6-3.23.2-4.84.8-6.46.4-8.08.0-9.6

L1

L2

H (mm)

(D)

P (mm)

(K)

M (mm)

Shear (N)

Tensile (N)

(mm)(mm)7.59.110.812.414.19.110.712.314.416.010.712.414.28.810.712.414.216.017.8

4.15.77.49.010.75.77.38.911.012.66.38.09.84.46.38.09.811.613.4

20M1

2.0 ±0.07

2.1

20M2 20M3 20M4 20M5

2.4 +0.07 -0.11 3.0 +0.07 -0.11 3.2 +0.07 -0.11

3.3 3.1 2.5

32 33 34 35 36 30M2 30M3 30M4 41 42 43 44 45 46

3.8±0.20.6±0.15 - 1.1 370 560

4.8±0.250.7±0.2 0.8±0.2 1.4 470 710

6.0±0.30.9±0.2 1.0±0.2 1.8 720 1050

6.4±0.30.9±0.2 1.1±0.2 1.8 910 1360

47 48 410 412

4.0 +0.07 -0.11

4.1

52 53 54 56 58 62 63

4.8 +0.07 -0.11

4.9

64 66 68 610 612* 616*

6.4 +0.07

6.5

84* 86* 88* 812*

9.6-11.29.6-12.812.8-16.016.0-19.21.2-3.23.2-4.84.8-6.46.4-9.69.6-12.81.6-3.23.2-4.84.8-6.46.4-9.69.6-12.8

- 9.6-12.8

- - 1.6-3.23.2-4.84.8-6.46.4-9.69.6-12.82.3-3.23.2-4.84.8-6.46.4-9.69.6-12.8

19.621.425.028.611.313.014.818.422.012.914.716.520.123.6

15.217.020.624.26.98.610.414.017.67.59.311.114.718.221.623.529.912.115.218.424.8

12.8±0.6

1.7±0.2

-

3.8

3680

5520

9.6±0.5

1.3±0.2

-

2.9

2020

2790

9.6±0.5

1.4±0.2

1.6±0.2

2.7

2140

3120

8.0±0.4

1.2±0.2

1.4±0.2

2.3

1390

2110

12.8-16.012.8-16.027.016.0-19.219.2-25.63.2-6.46.4-9.69.6-12.812.8-19.2

- - - - - -

28.935.317.620.723.930.2

󰀁

-0.11

The bodies of the rivets indicated by * are made of A5056. 󰀁

When making a selection, consider a safety factor of 3 to 5 times with respect to the design specification. Refer to \"Test Methods\" for the shear strength and tensile strength. 󰀁

NIPPON POP RIVETS AND FASTENERS LTD.󰀁2004/11/01